AlarmManager

$740.00$1,090.00

The central unit for monitoring, alarming and managing of the Kentix MultiSensors

  • Integrated GSM Modem
  • Monitored threats: up to 19
  • Radio – Ethernet
  • E-Mail (SSL) – SNMP Alarm
  • Up to 100 MultiSensors
  • Web-Server – App –  Cloud

GSM / RADIO / LAN 

Clear

Description

The AlarmManager – The central Kentix alarm and management unit

The information of the MultiSensors will managed by the AlarmManager. The AlarmManager is installed in the server room or rack, and forwards all alarms and error messages to the responsible persons. The configuration is done with a comfortable software via LAN. All system messages are stored in the internal memory.

The AlarmManager-PRO can handle up to 100 MultiSensors and KeyPads. Up to 100 user accounts can be created.

 

Overview of functions

  • Up to 100 MultiSensors connectable
  • Monitors up to 19 threats
  • Free PC-App for Windows, MacOS or Linux
  • Integrated web-server with intuitive user interface
  • Free smartphone APP (Android, iOS)
  • Full SNMP-V2 Support (MIB)
  • SMS gateway service for network-management-systems (e.g. PRTG, Nagios)
  • Alerting by E-Mail (SSL), GSM (SMS) or SNMP-Trap
  • Server Live-Check Monitoring for 20 devices
  • SNMP-Trap to SMS gateway function
  • IP camera trigger for 10 cameras
  • VDS2465 protocol for connection to alarm operation center (first responder)

 

Applications

  • Condition monitoring of IT- and server-rooms, data-center and infrastructure
  • Long term Datalogging with chart view and CSV/XML export
  • Fault detection
  • Air monitoring of IT rooms and racks
  • Integration into Network Monitoring Systems
  • Monitoring of remote sites

 

The dashboard – Current state of the system at a glance

You can check the current state of the entire system on the dashboard. When an alarm has occurred, you will see at a glance where the alarm has gone off and what kind of alarm it is. The alarm zone table shows which areas are armed or disarmed and whether there is a trespassing alarm in the respective zone.

The AlarmManager saves the last two months of the measured climate data – temperature, humidity and dew point – of all connected MultiSensors. These can be viewed in a graph either on a daily, weekly or monthly basis.

 

MultiSensor settings – Who will receive alarms and when?

In the ControlCenter, up to 100 users can be defined for the operation and alarming via the Kentix system. You can choose different authorizations for different users which will determine the way a user can operate the system, which alarm zones they can arm/disarm and if and how they will receive alarms. The configuration of the MultiSensors determines when an alarm is sent. In the setting for “Sensors – devices” all MultiSensors that are connected to the system are being managed. Here you can determine for each measurement value when an alarm will be triggered. Each MultiSensor is identified by a unique name and assigned to an alarm zone so that you can see directly where the alarm occurred.

 

Content of delivery

  • 1x AlarmManager-BASIC or -PRO respectively
  • Mounting bracket
  • Power supply
Just ask us! We have sparked your interest but you would like further information? Simply fill out the form on the following page and make an appointment for a live demo today. We will present you the all-in-one solution by Kentix and answer all of your questions.

Kentix StarterSet-PRO-1

 

Number of MultiSensor Max 100 pc MultiSensor-RF / -LAN / -RACK
Number of KeyPad Max 100 pc KeyPad connectable
Internal Buzzer 85dB, 2.3kHz
Ext. alarm inputs 1 x alarm input (Armed-Active, Always-Active), 1 x external arm/disarm, both for external potential-free contacts
Ext. relay outputs 2 x relay with alt. contact (Armed-Active, Always-Active); max. contact power: 125VAC/60VA, 60VDC/25W
Internal temper sensor 3-axis vibration-sensor (adjustable)
LED RUN (yellow), GSM (yellow), ALARM (red), ARMED (red)
Radio ZigBee® 2,4GHz ISM Band +3dBm output power, IEEE802.15.4, encryption AES 128 Bit
LAN 10/100Mbit
Integrated GSM Modem Quad Band (GSM/GPRS) 850/900/1800/1900MHz, integrated SIM card holder
Power supply 10-32VAC/DC power consumption ca 2W
Integrated UPS 4 minutes up time by internal high capacitor. Control of external power supply.
Kentix System-Port 2 pc. RJ45, for external plug´n play modules (KIO1, KIO2, KPS,…)
Chassis Material: PSSize: 130 x 90 x 45 mm (5.11 x 3.54 x 1.77 in), Weight approx. 300g (0.662 lbs), Color: High-White, Carbon-Black
Environmental conditions Temperature 0 – 45°C / 32 – 113°F; Humidity 5-95%, not condensing
Types KAM-BASIC-B = Chassis carbon black, KAM-BASIC-W = Chassis high white
Content of delivery Plug power supply 100-230VAC/24VDC, 12Watt2 pc of antennas (ZigBee, GSM), PowerAdapter, mounting bracket and material
Accessories Leakage sensor (KLS02P), External antennas with cable
Approvals CE

Additional information

Choose Option

AlarmManager Basic Carbon Black, AlarmManager Pro Carbon Black, AlarmManager Basic High White, AlarmManager Pro High White

Reviews

There are no reviews yet.

Be the first to review “AlarmManager”

Your email address will not be published. Required fields are marked *

Related Products