MultiSensor-LAN-RF

$620.00

MultiSensor-LAN with repeater for easy monitoring of distributed IT-rooms with one AlarmManager

  • Integrated sensors: 6
  • Monitored threats: up to 20
  • Wireless – LAN repeater
  • E-mail – SNMP alarm
  • Environmental monitoring
  • Power over Ethernet

LAN / PoE / RADIO

Clear
SKU: N/A Categories: , Tags: , ,

Description

Monitoring of all major threats with only one device

The MultiSensor-LAN-RF with its integrated radio-repeater is an ideal solution for distributed IT-room monitoring.  All required configurations are set up via the integrated web server directly on the device. Alarms are sent out immediately via e-mail which includes all necessary information to react right and fast.

Moreover, the MultiSensor offers a SNMP interface which allows an easy integration into most network management systems. For a comprehensive monitoring solution, the device can also be combined with an AlarmManager-PRO, the Kentix security central. This enables alarms to be sent via SMS as well. It can also be combined with other wireless Kentix components such as the KeyPad -Touch or a MultiSensor-RF.

MultiSensor-LAN-RF

 

 

Overview of functions

  • Integrated-Sensors: 8
  • Monitors up to 20 threats
  • LAN-ZigBee repeater
  • Embedded web-server with intuitive user-interface
  • PoE or external power supply possible
  • Full SNMP-V2 support
  • Alerting via E-Mail (SSL) or SNMP trap
  • An AlarmManager-PRO can be connected

 

 

Applications

  • Condition monitoring of IT- and server-rooms, data-center and infrastructure
  • Long term Datalogging with chart view and CSV/XML export
  • Fault detection
  • Air monitoring of IT rooms and racks
  • Integration into Network Monitoring Systems
  • Monitoring of remote sites

 

The dashboard – Current state of the system at a glance

You can check the current state of the entire system on the dashboard. When an alarm has occurred, you will see at a glance where the alarm has gone off and what kind of alarm it is. The alarm zone table shows which areas are armed or disarmed and whether there is a trespassing alarm in the respective zone.

The AlarmManager saves the last two months of the measured climate data – temperature, humidity and dew point – of all connected MultiSensors. These can be viewed in a graph either on a daily, weekly or monthly basis.

 

MultiSensor settings – Who will receive alarms and when?

In the ControlCenter, up to 100 users can be defined for the operation and alarming via the Kentix system. You can choose different authorizations for different users which will determine the way a user can operate the system, which alarm zones they can arm/disarm and if and how they will receive alarms. The configuration of the MultiSensors determines when an alarm is sent. In the setting for “Sensors – devices” all MultiSensors that are connected to the system are being managed. Here you can determine for each measurement value when an alarm will be triggered. Each MultiSensor is identified by a unique name and assigned to an alarm zone so that you can see directly where the alarm occurred.

 

Content of delivery

  • 1x MultiSensorLAN-RF
  • Mounting bracket
Just ask us! We have sparked your interest but you would like further information? Simply fill out the form on the following page and make an appointment for a live demo today. We will present you the all-in-one solution by Kentix and answer all of your questions.

Connectable devices Stand-Alone operation (integrated web server), AlarmManager-PRO
Sensor – Temperature range -20 to 99°C / -3 to 210°F
Sensor – Relative humidity range 0 to 100%
Sensor- Dew point in °C/°F calculated
Sensor – Motion PIR sensor, trigger sensitivity configurable, detection cone: approx. 100°, range: approx. 8m
Sensor – Vibration 3-axis vibration-sensor (adjustable)
Sensor – Carbon-monoxide (CO) 0-10.000ppm measurement ± 10%, Internal resolution: 20-200ppm (0-100%), lifetime approx. 5 years
Sensor – External alarm input 1 x alarm input (Armed-Active, Always-Active), 1 x sabotage input, wiring potential free
External alarm output 2 x open collector 0.1A/12V (alarming, remote switching)
Buzzer 85dB, 2.3kHz
LED ALARM (red), RUN (green), LINK/ACT at the LAN jack
LAN 10/100Mbit LAN connection, integrated web server
Radio ZigBee® 2,4GHz ISM band +3dBm output power, IEEE802.15.4, encryption AES 128 Bit
SNMP SNMP V2 (write/read), SNMP Traps
Power supply with PoE 12-72VAC/DC power consumption ca. 1.5W, PoE class 1
Power supply with external unit 12-32VAC/DC power consumption ca. 1.5W over system jack
Kentix System-Port RJ45, for external plug´n play modules (KIO1)
Chassis Material: PSSize: 90 x 90 x 45 mm (3.54 x 3.54 x 1.77 in), Weight approx. 100 g (0,220 lbs), Color: high white, carbon black
Environmental conditions Temperature 0 – 45°C / 32 – 113°F; Humidity 5-95%, non-condensing
Types KMS-LAN-B (Chassis Carbon-Black), KMS-LAN-W (Chassis High-White)
Content of delivery Mount bracket, Mounting material
Accessories PoE Injector (KPOE150S), Plug power supply (KOP), Power-Adapter (KIO1), Leakage sensor (KLS02P)
Approvals CE

Additional information

Color

Carbon Black, High White

Reviews

There are no reviews yet.

Be the first to review “MultiSensor-LAN-RF”

Your email address will not be published. Required fields are marked *

Related Products