Physical IT security with GSM alerting and 360° monitoring
With the StarterSet-PRO-1 you will get a complete package for quick entry into the innovative
monitoring technology by Kentix. The StarterSet-PRO-1 also all the components
you need in order to monitor a server room of up to approximately 20sqm. Due to the included
AlarmManager-PRO, the system can immediately be upgraded with network-compatible MultiSensors.
We recommend starting each new project with a StarterSet.
Overview of Functions
- Up to 100 MultiSensors
- Monitors up to 37 threats
- Free PC-App for Windows, MacOS or Linux
- Integrated web-server with intuitive user interface
- Free smartphone APP (Android, iOS)
- Full SNMP-V2 Support (MIB)
- SMS gateway service for network-management-systems (e.g. PRTG, Nagios)
- Alerting by E-Mail (SSL), GSM (SMS) or SNMP-Trap
- Server Live-Check Monitoring for 50 devices
- IP camera trigger
- Condition monitoring of IT- and server-rooms, data-center and infastructure
- Datalogging over months
- Fault detection
- Air monitoring of IT rooms and racks
- Integration into Network Monitoring Systems
- Monitoring of remote sites
The dashboard – Current state of the system at a glance
You can check the current state of the entire system on the dashboard. When an alarm
has occurred, you will see at a glance where the alarm has gone off and what kind of
alarm it is. The alarm zone table shows which areas are armed or disarmed and whether
there is a trespassing alarm in the respective zone.
The AlarmManager saves the last two months of the measured climate data – temperature,
humidity and dew point – of all connected MultiSensors. These can be viewed in a graph
either on a daily, weekly or monthly basis.
MultiSensor settings – Who will receive alarms and when?
In the ControlCenter, up to 100 users can be defined for the operation and alarming via
the Kentix system. You can choose different authorizations for different users which
will determine the way a user can operate the system, which alarm zones they can
arm/disarm and if and how they will receive alarms.
The configuration of the MultiSensors determines when an alarm is sent. In the setting
for “Sensors – devices” all MultiSensors that are connected to the system are being managed.
Here you can determine for each measurement value when an alarm will be triggered. Each
MultiSensor is identified by a unique name and assigned to an alarm zone so that you can
see directly where the alarm occurred.
Kentix360 – The security central for your coat pocket
With the integrated Cloud solution Kentix360 you always have the security state of your
system at hand. As the IT administrator you will be informed about all possible threats,
thanks to the app even via smartphone or tablet. This way, you can react as quickly as
possible and possibly to prevent damages before they occur. Kentix360 also allows you
to arm or disarm alarm zones remotely. Moreover, it reminds you to do routine check ups
of the system and regularly scans all system components for functionality.
Content of Delivery
- 1x AlarmManager-PRO with power supply and mounting brackets
- 1x MultiSensor-RF
- 1x MultiSensor-DOOR
- 1x Modular cable 10m
- 1x Patch cable 3m